CCNA 2 Chapter 9 v5 Exam Answers 2016
1
A network administrator needs to configure a standard ACL so that only the workstation of the administrator with the IP address 192.168.15.23 can access the virtual terminal of the main router. Which two configuration commands can achieve the task? (Choose two.)
A network administrator needs to configure a standard ACL so that only the workstation of the administrator with the IP address 192.168.15.23 can access the virtual terminal of the main router. Which two configuration commands can achieve the task? (Choose two.)
Router1(config)# access-list 10 permit 192.168.15.23 255.255.255.0
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.0*
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.255
Router1(config)# access-list 10 permit 192.168.15.23 255.255.255.255
Router1(config)# access-list 10 permit host 192.168.15.23*
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.0*
Router1(config)# access-list 10 permit 192.168.15.23 0.0.0.255
Router1(config)# access-list 10 permit 192.168.15.23 255.255.255.255
Router1(config)# access-list 10 permit host 192.168.15.23*
2
Refer to the exhibit. A router has an existing ACL that permits all traffic from the 172.16.0.0 network. The administrator attempts to add a new ACE to the ACL that denies packets from host 172.16.0.1 and receives the error message that is shown in the exhibit. What action can the administrator take to block packets from host 172.16.0.1 while still permitting all other traffic from the 172.16.0.0 network?
Manually add the new deny ACE with a sequence number of 5.*
Manually add the new deny ACE with a sequence number of 15.
Add a deny any any ACE to access-list 1.
Create a second access list denying the host and apply it to the same interface.
Manually add the new deny ACE with a sequence number of 15.
Add a deny any any ACE to access-list 1.
Create a second access list denying the host and apply it to the same interface.
3
Launch PT – Hide and Save PT
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
Why is the ACL not working?
The ACL is missing a deny ip any any ACE.
The ACL is applied in the wrong direction.
The access-list 105 command or commands are incorrect.
The ACL is applied to the wrong interface.*
No ACL is needed for this scenario.
The ACL is applied in the wrong direction.
The access-list 105 command or commands are incorrect.
The ACL is applied to the wrong interface.*
No ACL is needed for this scenario.
4
Which statement describes a characteristic of standard IPv4 ACLs?
Which statement describes a characteristic of standard IPv4 ACLs?
They are configured in the interface configuration mode.
They can be created with a number but not with a name.
They filter traffic based on source IP addresses only.*
They can be configured to filter traffic based on both source IP addresses and source ports.
They can be created with a number but not with a name.
They filter traffic based on source IP addresses only.*
They can be configured to filter traffic based on both source IP addresses and source ports.
5
Refer to the exhibit. The network administrator that has the IP address of 10.0.70.23/25 needs to have access to the corporate FTP server (10.0.54.5/28). The FTP server is also a web server that is accessible to all internal employees on networks within the 10.x.x.x address. No other traffic should be allowed to this server. Which extended ACL would be used to filter this traffic, and how would this ACL be applied? (Choose two.)
access-list 105 permit ip host 10.0.70.23 host 10.0.54.5
access-list 105 permit tcp any host 10.0.54.5 eq www
access-list 105 permit ip any any
access-list 105 permit tcp any host 10.0.54.5 eq www
access-list 105 permit ip any any
R1(config)# interface s0/0/0
R1(config-if)# ip access-group 105 out
R1(config-if)# ip access-group 105 out
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out ******************
R1(config-if)# ip access-group 105 out ******************
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21
access-list 105 permit tcp 10.0.0.0 0.255.255.255 host 10.0.54.5 eq www
access-list 105 deny ip any host 10.0.54.5
access-list 105 permit ip any any ********************
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21
access-list 105 permit tcp 10.0.0.0 0.255.255.255 host 10.0.54.5 eq www
access-list 105 deny ip any host 10.0.54.5
access-list 105 permit ip any any ********************
access-list 105 permit tcp host 10.0.54.5 any eq www
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20
access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21
R2(config)# interface gi0/0
R2(config-if)# ip access-group 105 in
6
What are two possible uses of access control lists in an enterprise network? (Choose two.)
R2(config-if)# ip access-group 105 in
6
What are two possible uses of access control lists in an enterprise network? (Choose two.)
limiting debug outputs*
reducing the processing load on routers
controlling the physical status of router interfaces
controlling virtual terminal access to routers*
allowing Layer 2 traffic to be filtered by a router
reducing the processing load on routers
controlling the physical status of router interfaces
controlling virtual terminal access to routers*
allowing Layer 2 traffic to be filtered by a router
7
An administrator has configured an access list on R1 to allow SSH administrative access from host 172.16.1.100. Which command correctly applies the ACL?
An administrator has configured an access list on R1 to allow SSH administrative access from host 172.16.1.100. Which command correctly applies the ACL?
R1(config-line)# access-class 1 out
R1(config-line)# access-class 1 in*
R1(config-if)# ip access-group 1 out
R1(config-if)# ip access-group 1 in
R1(config-line)# access-class 1 in*
R1(config-if)# ip access-group 1 out
R1(config-if)# ip access-group 1 in
8
Which three statements are generally considered to be best practices in the placement of ACLs? (Choose three.)
Which three statements are generally considered to be best practices in the placement of ACLs? (Choose three.)
Place extended ACLs close to the source IP address of the traffic.*
For every inbound ACL placed on an interface, there should be a matching outbound ACL.
Place extended ACLs close to the destination IP address of the traffic.
Place standard ACLs close to the destination IP address of the traffic.*
Filter unwanted traffic before it travels onto a low-bandwidth link.*
Place standard ACLs close to the source IP address of the traffic.
For every inbound ACL placed on an interface, there should be a matching outbound ACL.
Place extended ACLs close to the destination IP address of the traffic.
Place standard ACLs close to the destination IP address of the traffic.*
Filter unwanted traffic before it travels onto a low-bandwidth link.*
Place standard ACLs close to the source IP address of the traffic.
9
Which three implicit access control entries are automatically added to the end of an IPv6 ACL? (Choose three.)
Which three implicit access control entries are automatically added to the end of an IPv6 ACL? (Choose three.)
deny icmp any any
deny ipv6 any any*
permit icmp any any nd-ns*
permit ipv6 any any
deny ip any any
permit icmp any any nd-na*
deny ipv6 any any*
permit icmp any any nd-ns*
permit ipv6 any any
deny ip any any
permit icmp any any nd-na*
10
Which two characteristics are shared by both standard and extended ACLs? (Choose two.)
Which two characteristics are shared by both standard and extended ACLs? (Choose two.)
Both filter packets for a specific destination host IP address.
Both can be created by using either a descriptive name or number.*
Both include an implicit deny as a final ACE.*
Both can permit or deny specific services by port number.
Both kinds of ACLs can filter based on protocol type.
Both can be created by using either a descriptive name or number.*
Both include an implicit deny as a final ACE.*
Both can permit or deny specific services by port number.
Both kinds of ACLs can filter based on protocol type.
11
Place the options in the following order:
192.168.15.65 255.255.255.240 ==> the first valid host address in a subnet
192.168.15.144 0.0.0.15 ==> subnetwork address of a subnet with 14 valid host addreses
host 192.168.15.2 ==> all IP address bits must match exactly
192.168.5.0 0.0.3.255 ==> hosts in a subnet with SM 255.255.252.0
192.168.3.64 0.0.0.7 ==> address with a subnet 255.255.255.248
12
Consider the following access list that allows IP phone configuration file transfers from a particular host to a TFTP server:
192.168.15.144 0.0.0.15 ==> subnetwork address of a subnet with 14 valid host addreses
host 192.168.15.2 ==> all IP address bits must match exactly
192.168.5.0 0.0.3.255 ==> hosts in a subnet with SM 255.255.252.0
192.168.3.64 0.0.0.7 ==> address with a subnet 255.255.255.248
12
Consider the following access list that allows IP phone configuration file transfers from a particular host to a TFTP server:
R1(config)# access-list 105 permit udp host 10.0.70.23 host 10.0.54.5 range 1024 5000
R1(config)# access-list 105 deny ip any any
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out
Which method would allow the network administrator to modify the ACL and include FTP transfers from any source IP address?
R1(config)# interface gi0/0
R1(config-if)# no ip access-group 105 out
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out
R1(config-if)# no ip access-group 105 out
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 permit udp host 10.0.70.23 host 10.0.54.5 range 1024 5000
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 deny ip any any
R1(config)# interface gi0/0
R1(config-if)# no ip access-group 105 out
R1(config)# no access-list 105
R1(config)# access-list 105 permit udp host 10.0.70.23 host 10.0.54.5 range 1024 5000
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 deny ip any any
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out ******************
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 deny ip any any
R1(config)# interface gi0/0
R1(config-if)# no ip access-group 105 out
R1(config)# no access-list 105
R1(config)# access-list 105 permit udp host 10.0.70.23 host 10.0.54.5 range 1024 5000
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 20
R1(config)# access-list 105 permit tcp any host 10.0.54.5 eq 21
R1(config)# access-list 105 deny ip any any
R1(config)# interface gi0/0
R1(config-if)# ip access-group 105 out ******************
13
What two functions describe uses of an access control list? (Choose two.)
What two functions describe uses of an access control list? (Choose two.)
ACLs provide a basic level of security for network access.*
ACLs can control which areas a host can access on a network.*
Standard ACLs can restrict access to specific applications and ports.
ACLs can permit or deny traffic based upon the MAC address originating on the router.
ACLs assist the router in determining the best path to a destination.
ACLs can control which areas a host can access on a network.*
Standard ACLs can restrict access to specific applications and ports.
ACLs can permit or deny traffic based upon the MAC address originating on the router.
ACLs assist the router in determining the best path to a destination.
14
Which feature is unique to IPv6 ACLs when compared to those of IPv4 ACLs?
Which feature is unique to IPv6 ACLs when compared to those of IPv4 ACLs?
an implicit permit of neighbor discovery packets*
an implicit deny any any ACE
the use of named ACL entries
the use of wildcard masks
an implicit deny any any ACE
the use of named ACL entries
the use of wildcard masks
15
Which three statements describe ACL processing of packets? (Choose three.)
Which three statements describe ACL processing of packets? (Choose three.)
Each packet is compared to the conditions of every ACE in the ACL before a forwarding decision is made.
A packet that has been denied by one ACE can be permitted by a subsequent ACE.
Each statement is checked only until a match is detected or until the end of the ACE list.*
An implicit deny any rejects any packet that does not match any ACE.*
A packet that does not match the conditions of any ACE will be forwarded by default.
A packet can either be rejected or forwarded as directed by the ACE that is matched.*
A packet that has been denied by one ACE can be permitted by a subsequent ACE.
Each statement is checked only until a match is detected or until the end of the ACE list.*
An implicit deny any rejects any packet that does not match any ACE.*
A packet that does not match the conditions of any ACE will be forwarded by default.
A packet can either be rejected or forwarded as directed by the ACE that is matched.*
16
Which statement describes a difference between the operation of inbound and outbound ACLs?
Which statement describes a difference between the operation of inbound and outbound ACLs?
On a network interface, more than one inbound ACL can be configured but only one outbound ACL can be configured.
In contrast to outbound ALCs, inbound ACLs can be used to filter packets with multiple criteria.
Inbound ACLs are processed before the packets are routed while outbound ACLs are processed after the routing is completed.*
Inbound ACLs can be used in both routers and switches but outbound ACLs can be used only on routers.
In contrast to outbound ALCs, inbound ACLs can be used to filter packets with multiple criteria.
Inbound ACLs are processed before the packets are routed while outbound ACLs are processed after the routing is completed.*
Inbound ACLs can be used in both routers and switches but outbound ACLs can be used only on routers.
17
What is the only type of ACL available for IPv6?
What is the only type of ACL available for IPv6?
named standard
numbered extended
named extended*
numbered standard
numbered extended
named extended*
numbered standard
18
Which IPv6 ACL command entry will permit traffic from any host to an SMTP server on network 2001:DB8:10:10::/64?
Which IPv6 ACL command entry will permit traffic from any host to an SMTP server on network 2001:DB8:10:10::/64?
permit tcp any host 2001:DB8:10:10::100 eq 23
permit tcp host 2001:DB8:10:10::100 any eq 23
permit tcp host 2001:DB8:10:10::100 any eq 25
permit tcp any host 2001:DB8:10:10::100 eq 25*
permit tcp host 2001:DB8:10:10::100 any eq 23
permit tcp host 2001:DB8:10:10::100 any eq 25
permit tcp any host 2001:DB8:10:10::100 eq 25*
19
Refer to the exhibit. The IPv6 access list LIMITED_ACCESS is applied on the S0/0/0 interface of R1 in the inbound direction. Which IPv6 packets from the ISP will be dropped by the ACL on R1?
neighbor advertisements that are received from the ISP router
ICMPv6 packets that are destined to PC1*
packets that are destined to PC1 on port 80
HTTPS packets to PC1
ICMPv6 packets that are destined to PC1*
packets that are destined to PC1 on port 80
HTTPS packets to PC1
20
If a router has two interfaces and is routing both IPv4 and IPv6 traffic, how many ACLs could be created and applied to it?
If a router has two interfaces and is routing both IPv4 and IPv6 traffic, how many ACLs could be created and applied to it?
4
8*
6
16
12
8*
6
16
12
21 . Which IPv4 address range covers all IP addresses that match the ACL filter specified by 172.16.2.0 with wildcard mask 0.0.1.255?
172.16.2.1 to 172.16.255.255
172.16.2.1 to 172.16.3.254
172.16.2.0 to 172.16.2.255
172.16.2.0 to 172.16.3.255*
172.16.2.1 to 172.16.3.254
172.16.2.0 to 172.16.2.255
172.16.2.0 to 172.16.3.255*
22. What packets would match the access control list statement that is shown below?
+++++ access-list 110 permit tcp 172.16.0.0 0.0.0.255 any eq 22 +++++
+++++ access-list 110 permit tcp 172.16.0.0 0.0.0.255 any eq 22 +++++
SSH traffic from the 172.16.0.0 network to any destination network*
SSH traffic from any source network to the 172.16.0.0 network
any TCP traffic from any host to the 172.16.0.0 network
any TCP traffic from the 172.16.0.0 network to any destination network
23. What single access list statement matches all of the following networks?
192.168.16.0
192.168.17.0
192.168.18.0
192.168.19.0
192.168.16.0
192.168.17.0
192.168.18.0
192.168.19.0
access-list 10 permit 192.168.16.0 0.0.3.255*
access-list 10 permit 192.168.16.0 0.0.0.255
access-list 10 permit 192.168.16.0 0.0.15.255
access-list 10 permit 192.168.0.0 0.0.15.255
access-list 10 permit 192.168.16.0 0.0.0.255
access-list 10 permit 192.168.16.0 0.0.15.255
access-list 10 permit 192.168.0.0 0.0.15.255
24. What is a limitation when utilizing both IPv4 and IPv6 ACLs on a router?
A device can run only IPv4 ACLs or IPv6 ACLs.
Both IPv4 and IPv6 ACLs can be configured on a single device, but cannot share the same name.*
IPv4 ACLs can be numbered or named whereas IPv6 ACLs must be numbered.
IPv6 ACLs perform the same functions as standard IPv4 ACLs.
Both IPv4 and IPv6 ACLs can be configured on a single device, but cannot share the same name.*
IPv4 ACLs can be numbered or named whereas IPv6 ACLs must be numbered.
IPv6 ACLs perform the same functions as standard IPv4 ACLs.
25. In which configuration would an outbound ACL placement be preferred over an inbound ACL placement?
when the ACL is applied to an outbound interface to filter packets coming from multiple inbound interfaces before the packets exit the interface*
when a router has more than one ACL
when an outbound ACL is closer to the source of the traffic flow
when an interface is filtered by an outbound ACL and the network attached to the interface is the source network being filtered within the ACL
when a router has more than one ACL
when an outbound ACL is closer to the source of the traffic flow
when an interface is filtered by an outbound ACL and the network attached to the interface is the source network being filtered within the ACL
26. What method is used to apply an IPv6 ACL to a router interface?
the use of the access-class command
the use of the ip access-group command
the use of the ipv6 traffic-filter command*
the use of the ipv6 access-list command
the use of the ip access-group command
the use of the ipv6 traffic-filter command*
the use of the ipv6 access-list command
27.
Refer to the exhibit. What will happen to the access list 10 ACEs if the router is rebooted before any other commands are implemented?
The ACEs of access list 10 will be deleted.
The ACEs of access list 10 will be deleted.
The ACEs of access list 10 will not be affected.
The ACEs of access list 10 will be renumbered.*
The ACEs of access list 10 wildcard masks will be converted to subnet masks.
28.
Refer to the exhibit. What is the result of adding the established argument to the end of the ACE?
Any traffic is allowed to reach the 192.168.254.0 255.255.254.0 network.
Any IP traffic is allowed to reach the 192.168.254.0 255.255.254.0 network as long as it is in response to an originated request.
192.168.254.0 /23 traffic is allowed to reach any network.
Any TCP traffic is allowed to reach the 192.168.254.0 255.255.254.0 network if it is in response to an originated request.*
Any IP traffic is allowed to reach the 192.168.254.0 255.255.254.0 network as long as it is in response to an originated request.
192.168.254.0 /23 traffic is allowed to reach any network.
Any TCP traffic is allowed to reach the 192.168.254.0 255.255.254.0 network if it is in response to an originated request.*
Post a Comment