Hey Guys How R U ? Today I am going to share ccna r&s v3 200-125 Latest Dump ... It Contains Total 401 Questions And Ans.... Enjoy
V-30 Dumps https://drive.google.com/file/d/0B7apnrccz67RLUNaVW9OeGFuZ1E/view
V-30 Dumps https://drive.google.com/file/d/0B7apnrccz67RLUNaVW9OeGFuZ1E/view
V-27 Dumps https://www.file-upload.com/zz2z7d2lo61n
V-27 + Vce password Is :9tut
https://app.box.com/s/p6mrp4syj5xnc3on2i3ov8hy27u39e8y
More IMportant Dumps: http://www.mediafire.com/file/orm804jw5eoyf7u/CCNAquestions_Jun_2017.pdf
IMPORTANT QUESTIONS :
Which two statements about TACACS+ are true? (Choose two.)?
A. lt can run on a UNlX server.
B. lt authenticates against the user database on the local device.
C. lt is more secure than AAA authentication.
D. lt is enabled on Cisco routers by default.
E. lt uses a managed database
Correct Answer: AE
Explanation in dump v27 by genius(can’t paste links here)
What are two requirements for an HSRP group? (Choose two.)?
A. exactly one active router
B. one or more standby routers
C. one or more backup virtual routers
D. exactly one standby active router
E. exactly one backup virtual router
Correct Answer: AD
Explanation in dump v27 by genius
V-27 + Vce password Is :9tut
https://app.box.com/s/p6mrp4syj5xnc3on2i3ov8hy27u39e8y
More IMportant Dumps: http://www.mediafire.com/file/orm804jw5eoyf7u/CCNAquestions_Jun_2017.pdf
IMPORTANT QUESTIONS :
Which option describes a difference between EIGRP for IPv4 and IPv6?
A. Only EIGRP for IPv6 advertises all connected networks.
B. Only EIGRP for IPv6 requires a router ID to be configured under the routing process-
C. AS numbers are configured in EIGRP but not in EIGRPv3.
D. Only EIGRP for IPv6 is enabled in the global configuration mode.
B. Only EIGRP for IPv6 requires a router ID to be configured under the routing process-
C. AS numbers are configured in EIGRP but not in EIGRPv3.
D. Only EIGRP for IPv6 is enabled in the global configuration mode.
Answer: B
Sorry I can`t remember this Question?
A. It prioritizes routing protocol traffic.
B. It remarks traffic that is below the CIR
C. It drops traffic that exceeds the CIR.
D. It queues and then transmits traffic that exceeds the CIR.
B. It remarks traffic that is below the CIR
C. It drops traffic that exceeds the CIR.
D. It queues and then transmits traffic that exceeds the CIR.
Answer: C
Which process is associated with spanning-tree convergence?
A. determining the path cost
B. electing designated ports
C. learning the sender bridge ID
D. assigning the port ID
B. electing designated ports
C. learning the sender bridge ID
D. assigning the port ID
Answer: B
When enabled, which feature prevents routing protocols from sending hello messages on an interface’?
A. virtual links
B. passive-interface
C. directed neighbors
D. OSPF arrears
A. virtual links
B. passive-interface
C. directed neighbors
D. OSPF arrears
Answer: B
what is a difference between TACACS+ and RADIUS in AAA?
A. Only TACACS+ allows for separate authentication.
B. Only RADIUS encrypts the entire access-request packet.
C. Only RADIUS uses TCP.
D. Only TACACS+ couples authentication and authorization.
B. Only RADIUS encrypts the entire access-request packet.
C. Only RADIUS uses TCP.
D. Only TACACS+ couples authentication and authorization.
Answer: A
Which option is a benefit of switch stacking?
A. It provides redundancy with no impact on resource usage.
B. It simplifies adding and removing hosts.
C. It supports better performance of high-needs applications.
D. It provides higher port density with better resource usage.
B. It simplifies adding and removing hosts.
C. It supports better performance of high-needs applications.
D. It provides higher port density with better resource usage.
Answer: D
Which spanning-tree feature places a port immediately into a forwarding stated?
A. BPDU guard
B. Port Fast
C. loop guard
D. UDLD
E. Uplink Fast
A. BPDU guard
B. Port Fast
C. loop guard
D. UDLD
E. Uplink Fast
Answer: B
Which statement about MPLS is true?
A. It operates in Layer 1.
B. It operates between Layer 2 and Layer 3.
C. It operates in Layer 3.
D. it operates in layer 2
A. It operates in Layer 1.
B. It operates between Layer 2 and Layer 3.
C. It operates in Layer 3.
D. it operates in layer 2
Answer: B
I am Genius.
I pass my exam with 96x/1000. Rip, ACL mod 3 (with ip addresses not the same as in 9tut) in last Access-list entry I used “permit ip any any” and got maximum points on Security section
In drag drop was cables (straight, crossover, rollover and added DTE/DCE – is used in router serial to router serial)
I pass my exam with 96x/1000. Rip, ACL mod 3 (with ip addresses not the same as in 9tut) in last Access-list entry I used “permit ip any any” and got maximum points on Security section
In drag drop was cables (straight, crossover, rollover and added DTE/DCE – is used in router serial to router serial)
Some question in dump is not exactly same as in exam
QUESTION 330: How is the redundancy represented in ntp master?
A. N:1 B.N+1 C. 1:N
In exam it was question:
How is provided master redundancy on a stacked switches:
A. 1:N B. N:1 C. 1:1 D. 1+N
correct answer A. 1:N
– http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-series-switches/prod_white_paper09186a00801b096a.html
QUESTION 131
How do you maintain security in multiple websites?
A. vpn B. dmvpn C. other D. other
In exam it was question:
Which technology you will choose to connect multiple sites with secure connections?
A. Point-to-point B. DMVPN C. vpn D. other
Correct answer B
QUESTION 144?
What is the two benefits of DHCP snooping ? (Choose two)
?A. static reservation?B. DHCP reservation?C. prevent DHCP rouge server?D. prevent untrusted host and servers to connect
In exam it was answers:?
A. prevents static reservation B. prevents DHCP reservation C. prevent DHCP rouge server D. track users hosts on the network.
Answer still C, D
QUESTION 253?
Refer to the exhibit. If R1 sends traffic to 192.168.101.45 the traffic is sent through which interface?
In exam it was question:
Refer to the exhibit. If R1 sends traffic to 192.168.10.45 the traffic is sent through which interface?
And you must know how to calculate net mask, first ip, last ip and broadcast. At the picture there is route to 192.168.10.32/27 throw Fast Ethernet 0/1
Answer: A. FastEthernet0/1
I had a few new questions:
1. What can you change to select switch as Root Bridge??
A. make lower priority B. make higher priority C. make lower path cost D. make higher path cost?
Answer: A
2. Refer to exhibit. (picture the same as in question 238 in dump v27). What Administrative distance has route to 192.168.10.1 ?
A. 1 B. 90 C. 110 D. 120
Answer: B
QUESTION 330: How is the redundancy represented in ntp master?
A. N:1 B.N+1 C. 1:N
In exam it was question:
How is provided master redundancy on a stacked switches:
A. 1:N B. N:1 C. 1:1 D. 1+N
correct answer A. 1:N
– http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3750-series-switches/prod_white_paper09186a00801b096a.html
QUESTION 131
How do you maintain security in multiple websites?
A. vpn B. dmvpn C. other D. other
In exam it was question:
Which technology you will choose to connect multiple sites with secure connections?
A. Point-to-point B. DMVPN C. vpn D. other
Correct answer B
QUESTION 144?
What is the two benefits of DHCP snooping ? (Choose two)
?A. static reservation?B. DHCP reservation?C. prevent DHCP rouge server?D. prevent untrusted host and servers to connect
In exam it was answers:?
A. prevents static reservation B. prevents DHCP reservation C. prevent DHCP rouge server D. track users hosts on the network.
Answer still C, D
QUESTION 253?
Refer to the exhibit. If R1 sends traffic to 192.168.101.45 the traffic is sent through which interface?
In exam it was question:
Refer to the exhibit. If R1 sends traffic to 192.168.10.45 the traffic is sent through which interface?
And you must know how to calculate net mask, first ip, last ip and broadcast. At the picture there is route to 192.168.10.32/27 throw Fast Ethernet 0/1
Answer: A. FastEthernet0/1
I had a few new questions:
1. What can you change to select switch as Root Bridge??
A. make lower priority B. make higher priority C. make lower path cost D. make higher path cost?
Answer: A
2. Refer to exhibit. (picture the same as in question 238 in dump v27). What Administrative distance has route to 192.168.10.1 ?
A. 1 B. 90 C. 110 D. 120
Answer: B
This one I had on exam and it is from old dumps (545 and 400 has this question)
3. Which command is used to enable CHAP authentication, with PAP as the fallback method, on a serial interface?
A. Router(config-if)# ppp authentication chap fallback ppp
B. Router(config-if)# ppp authentication chap pap
C. Router(config-if)# authentication ppp chap fallback ppp
D. Router(config-if)# authentication ppp chap pap
Answer: B
Explanation:
This command tells the router first to use CHAP and then go to PAP if CHAP isn’t?available.
Had this new question same like wrote @asd?
Which statement about IPv6 link-local addresses is true?
A. they must be configured on all IPv6 interface
B. They must be globally unique
C. They must be manually configured
D. They are advertised globally on the network?
Correct answer A.
Other option obviously incorrect
Had this new question same like wrote @soya
Which configuration can be used with PAT to allow multiple inside address to be translated to a single outside address?
A. Dynamic Routing B. DNS C. Preempt D. overload
Correct answer D
@Ataiz? doka has answered these questions correct.
Which two statements about MPLS are true? (Choose two)?
A. It provides automatic authentication
B. It can carry multiple protocols, including IPv4 and IPv6
C. It encapsulates all traffic in an IPv4 header
D. It uses labels to separate and foward customer traffic
E. It tags customer traffic using 802.1q
Correct answer B,D
Which statement about recovering a password on a Cisco router is true??
A.The default reset password is cisco
B. It requires a secure SSl/VPN connection
C. A factory resset is required if you forget the password
D. It requires physical access to the router
Correct answer D
Which two types of information are held in the MAC address table? (Choose two)?
A. MAC address B. soure IP address C. destination IP address D. Protocols E. Port numbers
Correct answer A,E
Which command can you enter to create a NAT pool of 6 addresses??
A. Router(config)#ip nat pool test 175.17.12.69 175.17.12.74 prefix-length 24
B. Router(config)#ip nat pool test 175.17.12.69 175.17.13.74 prefix-length 16
C. Router(config)#ip nat pool test 175.17.12.66 175.17.12.72 prefix-length 8
D. Router(config)#ip nat pool test 175.17.12.69 175.17.12.76 prefix-length 8
Correct answer A
prefix-length does not take part in election something like more specific.
Answer A
because its only option, that has 6 ip addresses – 69,70,71,72,73,74. In command you must use range which will include ip addresses that nat will use in translation.
Which header field is new on IPv6?
A. Version B. Hop Limit C. Flow Label D. Traffic Class
Correct answer C
انما hop limit دا البديل بتاع الTTL ف ipv6
3. Which command is used to enable CHAP authentication, with PAP as the fallback method, on a serial interface?
A. Router(config-if)# ppp authentication chap fallback ppp
B. Router(config-if)# ppp authentication chap pap
C. Router(config-if)# authentication ppp chap fallback ppp
D. Router(config-if)# authentication ppp chap pap
Answer: B
Explanation:
This command tells the router first to use CHAP and then go to PAP if CHAP isn’t?available.
Had this new question same like wrote @asd?
Which statement about IPv6 link-local addresses is true?
A. they must be configured on all IPv6 interface
B. They must be globally unique
C. They must be manually configured
D. They are advertised globally on the network?
Correct answer A.
Other option obviously incorrect
Had this new question same like wrote @soya
Which configuration can be used with PAT to allow multiple inside address to be translated to a single outside address?
A. Dynamic Routing B. DNS C. Preempt D. overload
Correct answer D
@Ataiz? doka has answered these questions correct.
Which two statements about MPLS are true? (Choose two)?
A. It provides automatic authentication
B. It can carry multiple protocols, including IPv4 and IPv6
C. It encapsulates all traffic in an IPv4 header
D. It uses labels to separate and foward customer traffic
E. It tags customer traffic using 802.1q
Correct answer B,D
Which statement about recovering a password on a Cisco router is true??
A.The default reset password is cisco
B. It requires a secure SSl/VPN connection
C. A factory resset is required if you forget the password
D. It requires physical access to the router
Correct answer D
Which two types of information are held in the MAC address table? (Choose two)?
A. MAC address B. soure IP address C. destination IP address D. Protocols E. Port numbers
Correct answer A,E
Which command can you enter to create a NAT pool of 6 addresses??
A. Router(config)#ip nat pool test 175.17.12.69 175.17.12.74 prefix-length 24
B. Router(config)#ip nat pool test 175.17.12.69 175.17.13.74 prefix-length 16
C. Router(config)#ip nat pool test 175.17.12.66 175.17.12.72 prefix-length 8
D. Router(config)#ip nat pool test 175.17.12.69 175.17.12.76 prefix-length 8
Correct answer A
prefix-length does not take part in election something like more specific.
Answer A
because its only option, that has 6 ip addresses – 69,70,71,72,73,74. In command you must use range which will include ip addresses that nat will use in translation.
Which header field is new on IPv6?
A. Version B. Hop Limit C. Flow Label D. Traffic Class
Correct answer C
انما hop limit دا البديل بتاع الTTL ف ipv6
Which two statements about TACACS+ are true? (Choose two.)?
A. lt can run on a UNlX server.
B. lt authenticates against the user database on the local device.
C. lt is more secure than AAA authentication.
D. lt is enabled on Cisco routers by default.
E. lt uses a managed database
Correct Answer: AE
Explanation in dump v27 by genius(can’t paste links here)
What are two requirements for an HSRP group? (Choose two.)?
A. exactly one active router
B. one or more standby routers
C. one or more backup virtual routers
D. exactly one standby active router
E. exactly one backup virtual router
Correct Answer: AD
Explanation in dump v27 by genius
Post a Comment